Biasi
Riva Compact M90E 28kW
Combi Boiler
28kW
2010-2020
ErP A
38 fault codes
<p>The Riva Compact M90E 28kW is a combi boiler from Biasi, available at 28kW output. Produced 2010-2020.</p>
Riva Compact M90E 28kW Fault Codes 38
Code
Description
Severity
Type
A1
Gas Valve Fault
The gas valve has a fault — not responding to control commands correctly.
High
Engineer
View Guide
E1
Low Water Pressure
The system water pressure has dropped below the safe minimum on Biasi boilers.
Low
DIY
View Guide
E10
Return Temperature Sensor Fault
The return NTC temperature sensor has developed a fault.
Medium
Engineer
View Guide
E11
False Flame Signal
The boiler is detecting a flame when the gas valve is closed. This is a serious…
High
Engineer
View Guide
E12
DHW Temperature Sensor Fault
The domestic hot water NTC temperature sensor is faulty.
Medium
Engineer
View Guide
E14
Gas Valve Fault
The gas valve is not responding correctly to commands from the PCB.
High
Engineer
View Guide
E16
Condensate Trap Full / Blocked
The condensate trap is full or the drain pipe is blocked. Condensate cannot drain freely.
Medium
DIY
View Guide
E17
Low Water Pressure
The system water pressure is below the minimum operating level.
Low
DIY
View Guide
E2
Safety Thermostat Activated
The boiler has overheated and the safety thermostat has cut out to prevent damage.
High
Engineer
View Guide
E3
Overheat Fault
The boiler has overheated and the safety thermostat has activated.
High
Engineer
View Guide
E4
Fan Fault / Air Pressure Switch
The fan is not operating correctly or the air pressure switch is not confirming airflow.
High
Engineer
View Guide
E5
NTC Sensor Fault
A temperature sensor (NTC thermistor) has a fault — either the flow or return sensor.
Medium
Engineer
View Guide
E6
False Flame Detected
The boiler's ionisation circuit has detected a flame when the gas valve should be closed.
High
Engineer
View Guide
E8
Flow Temperature Sensor Fault
The flow NTC temperature sensor has a short circuit or open circuit.
Medium
Engineer
View Guide
E9
Flue/Exhaust Temperature Fault
The flue gas temperature has exceeded safe limits, or there is an issue with the flue…
High
Engineer
View Guide
I1
Ignition Failure / No Flame
The most common Biasi fault code — the boiler has failed to ignite or lost its…
Medium
DIY
View Guide
I2
Overheat Lockout (Severe)
A severe overheat lockout that requires manual reset — more serious than E3.
High
Engineer
View Guide