Halstead
Best DB 80
Regular
23kW
1990-2005
ErP D
15 fault codes
<p>The Best DB 80 is a combi boiler from Halstead, available at 23kW output. Produced 1990-2005.</p>
Best DB 80 Fault Codes 15
Code
Description
Severity
Type
1
Ignition Lockout
The boiler has failed to ignite and locked out. On older Halstead models this is indicated…
High
Engineer
View Guide
10
Diverter Valve Fault
The diverter valve is stuck or not switching correctly between heating and hot water. This was…
Medium
Engineer
View Guide
11
Differential Check Failure
The temperature difference between flow and return is outside expected limits. Indicates a circulation problem.
Medium
Engineer
View Guide
12
Low Water Pressure
System water pressure has dropped below the minimum safe level.
Low
DIY
View Guide
2
Overheat Lockout
The safety thermostat has activated due to overheating. The boiler has shut down to prevent damage.
High
Engineer
View Guide
3
Fan / Air Pressure Switch Fault
The fan is not running correctly or the air pressure switch is not confirming airflow.
High
Engineer
View Guide
4
Flame Loss During Operation
The boiler had a stable flame but lost it during operation. May indicate gas supply interruption…
High
Engineer
View Guide
5
Return Thermistor Fault
The return water temperature sensor is reading outside its normal range.
Medium
Engineer
View Guide
6
Flow Thermistor Fault
The flow water temperature sensor is faulty or reading incorrectly.
Medium
Engineer
View Guide
7
DHW Thermistor Fault
The domestic hot water temperature sensor has developed a fault.
Medium
Engineer
View Guide
8
PCB / Electronics Fault
The printed circuit board has an internal error. On Halstead Ace High models, PCB failure was…
High
Engineer
View Guide
9
Gas Valve Fault
The gas valve is not responding to commands. The solenoid may be faulty.
High
Engineer
View Guide