Grant
Vortex Eco 15-21kW
Heat Only Boiler
21kW
2012-present
ErP A
23 fault codes
<p>The Vortex Eco 15-21kW is a heat-only (regular) boiler from Grant, available at 21kW output. Produced 2012-present.</p>
Vortex Eco 15-21kW Fault Codes 23
Code
Description
Severity
Type
BURNER LOCKOUT
Burner Lockout
The oil burner has gone to lockout — the red lockout light on the burner control…
High
DIY
View Guide
E01
Internal Control Fault
The boiler's internal control electronics have detected a fault.
High
Engineer
View Guide
EE1
High Pressure / Pump Failure / Airlock
On Grant heat pump models, EE1 indicates high pressure caused by circulating pump failure or an…
High
Engineer
View Guide
NO FUEL
No Oil Supply / Empty Tank
The burner cannot obtain an adequate supply of oil fuel. The tank may be empty, the…
High
DIY
View Guide
OVERHEAT
Overheat Thermostat Activated
The boiler's overheat safety thermostat has tripped. On Grant oil boilers this usually means the boiler…
High
Engineer
View Guide
PP1
Flow/Return Temperature Sensor Fault
The inlet (return) water temperature sensor has failed on Grant heat pump models.
Medium
Engineer
View Guide
RED LIGHT STEADY
UV Sensor / Gas Valve Fault (Vortex Blue)
On Grant Vortex Blue oil burners, a steady red light indicates the UV sensor is defective…
High
Engineer
View Guide
SMOKE/FLUE FAULT
Visible Smoke or High Smoke Number
Black or grey smoke visible from the flue, or a high smoke number on combustion testing.…
High
Engineer
View Guide