E37
FAULT CODE
Keston
Water Pressure Error
Low Severity
DIY Check Possible
The water pressure is too low — increase system pressure using the filling loop.
Step-by-Step Fix Guide
-
Step 1
Repressurise the system to 1.5 bar using the filling loop
-
Step 2
Reset the boiler
-
Step 3
If pressure drops again, contact a Gas Safe engineer to check for leaks
Gas Safe Reminder
Work on gas appliances must be carried out by a Gas Safe registered engineer. The steps above cover safe checks a homeowner can perform - any internal component replacement requires a qualified professional. If in doubt, always call an engineer.