E50
FAULT CODE
Baxi
Flow Temperature Sensor Fault
Medium Severity
Engineer Required
The flow water temperature NTC sensor has developed a fault. The boiler cannot accurately measure the outgoing water temperature.
Step-by-Step Fix Guide
-
Step 1
A Gas Safe engineer will need to test the flow NTC sensor with a multimeter
-
Step 2
The sensor should read approximately 12 kOhms at 20°C
-
Step 3 Engineer only
The sensor may need replacing
Gas Safe Reminder
Work on gas appliances must be carried out by a Gas Safe registered engineer. The steps above cover safe checks a homeowner can perform - any internal component replacement requires a qualified professional. If in doubt, always call an engineer.